A special series of ATMOS combined boilers for burning wood based on the principle of generator gasification, equipped with a pellet burner, offers the customers variability and heating comfort. Thanks to the modern method of wood gasification and electronically controlled burning of pellets with automatic ignition and fuel feeding, these boilers achieve high efficiency and low fuel consumption during environmentally friendly operation. The boilers are also equipped with the function of automatic burner start after the wood has been burnt out and the energy from the accumulation tanks has been used. The possibility of fuel change, manual heating with wood and fully automatic heating with pellets makes these ATMOS boilers top products on the European market.
Accessories
-
Equithermal control ACD 03/04
It is designed to control the hot water system of a heated building. Control of the controller is simple and intuitive thanks to the touch screen. The controller contains functions for direct control of the boiler, boiler circuit, up to three heating circuits, domestic hot water, solar, etc …
![Equithermal control ACD 03/04]()
- heating of up to three heating circuits
- domestic hot water heating
- solar heating
- optimal charging / discharging of storage tanks
- automatic switching of operation of two heat sources (boilers)
- complete operation of the boiler, including the exhaust fan
look for more -
Room units for equithermal control ACD 03/04
For optimal and economical heating of your building, we recommend you to purchase one of our room units ARU5, ARU10 and ARU30 with a touch screen as an accessory (for each heating circuit) for a better possibility to regulate the heating system.
![Room units for equithermal control ACD 03/04]()
look for more -
Optional accessories for equithermal control ATMOS ACD 03/04
Optional accessories that can be purchased in addition to the already created kits for equithermal control ATMOS ACD 03/04
![Optional accessories for equithermal control ATMOS ACD 03/04]()
look for more -
The Laddomat 22
Hydraulic fitting forming the boiler circuit to maintain the minimum temperature of the return water to the boiler.
![The Laddomat 22]()
For boiler output: 15 – 100 kW
Consists of:
- cast iron body
- thermoregulating valve
- pump
- check valve
- thermometer
- ball valve
look for more -
Accumulation tanks
The best connection for solid fuel boilers, increases boiler life and several fuel consumption. If it cannot have the recommended volume of storage tanks, connect the boiler with at least one buffer tank with a volume of 500 l to 1000 l
![Accumulation tanks]()
- lower fuel consumption
- long service life of the boiler and chimney
- can be combined with other heating methods
- designed for combinations of radiators with underfloor heating
- comfortable heating and ideal fuel combustion
- guaranteed more environmentally friendly heating
- warranty on the boiler body 3 years
look for more -
Pellet burners
ATMOS burners are primarily intended for ATMOS pellet boilers or as accessories for combined ATMOS boilers.
![Pellet burners]()
Power range: 4.5 – 80 kW
- possibility of connecting four sensors
- two backup inputs for different applications
- solar system control
- automatic burner start after wood burning for DCxxSP boilers
look for more -
Pneumatic pellet feeding
Pneumatic transport of pellets is used for continuous refueling from the external central tank to the pellet tank in the boiler room.
![Pneumatic pellet feeding]()
Consists of:
- buffer tank
- separation tank
- suction fan
- rotary pellet level sensor
řízeno elektronickou regulací AC19 a AC21
look for more -
Pellet conveyors
Pellet screw conveyors are designed for ATMOS pellet burners. Manufactured as shaft and shaftless in various lengths. Equipped with a geared motor.
![Pellet conveyors]()
for ATMOS 25 burner
- Conveyors DA1500, DA12345
for ATMOS 45/85 burner
- DRA50 conveyor (1.7 m, 2.5 m, 4 m, 5 m)
for compact tanks with a volume of 240, 300 and 400l
- DRA25 conveyor (1.3 m, 1.7 m)
look for more -
Pellet tanks
The tanks serve as pellet hoppers for automatic pellet boilers. They allow great variability of location in the boiler room and, last but not least, increase the comfort of the boiler operator
![Pellet tanks]()
Tank volumes
- Pellet tank 250 l
- Pellet tank 500 l
- Pellet tank 1000 l
look for more -
Textile silo for pellets
Large textile bins are designed to store pellets for the heating season. They can be placed in the boiler room or adjacent areas. Another option is to place them in enclosed outdoor shelters so that they are not exposed to sunlight and weather conditions.
![Textile silo for pellets]()
- Usable volume 5.5 – 7.9m³
- With STORZ A110 flange
- Convenient storage
- Easy installation
look for more -
Pneumatic cleaning of the pellet burner
It is a device designed for cleaning the combustion chamber of the burner when burning lower quality wood pellets, which form lumps. That is, the combustion of wood pellets with a higher content of bark and impurities. The device does not solve and is not intended for burning plant pellets and grain.
![Pneumatic cleaning of the pellet burner]()
look for more -
External air supply for ATMOS A25 pellet burner
The device enables the supply of combustion air to the ATMOS A25 burner from outside areas.
![External air supply for ATMOS A25 pellet burner]()
Designed only for ATMOS A25 burner and pure pellet boilers from ATMOS up to a boiler output of 25 kW.
Designed for boilers with an exhaust fan
D20P, D15PX, D20PX, D25PXDesigned for boilers without an exhaust fan
D15P, D10PX, D14P, D21P, D25Plook for more -
Connection of boilers ATMOS F12 Laddomat
Professional stainless steel connection based on 35 × 1.5 mm diameter pipe, designed to maintain a minimum temperature of return water to the boiler and quickly connect the boiler using two 6/4“ flat seal fittings. The connection includes all the necessary components required by the manufacturer (safety valve 2.5 bar, vent valve, manometer, Laddomat 22,…
![Connection of boilers ATMOS F12 Laddomat]()
look for more -
Boiler connection accessories
The accessories contain a wide range of elements for the extension of the F1 – F4 (F5 – F8), F12 (F13), F15 – F16 (F17 – F18) and F21 – F22 sets. From various pipes to pump groups to pump group manifolds.
![Boiler connection accessories]()
look for more
